8x10 Premier Package

Description
Reviews
Q&A

Shipping Time

Specs

Laundering

Assembly

Our best selling backdrop kit!

This 8 foot tall x 10 foot wide pipe and drape kit includes:

Qty 2: B102 - 8 foot tall fixed height silver (or black, with upgrade) slip-fit upright (1.5 inch diameter)
Qty 2: B505 - 16 inch x 14 inch silver (or black, with upgrade) steel slip-fit base (approx. 10 lbs. each with included base pin)
Qty 1: B402 - Adjustable 6-10 foot wide silver drape support rod / crossbar
Qty 3: D703 - 94 inch high x 60 inch wide Premier drape with 4 inch rod pocket sewn into top and bottom

NOTE: Drapes are sewn 2 inches shorter than 8 feet tall to avoid dragging on the floor. The drapes are not pre-pleated; they are sewn flat and are gathered by hand on the Support Rod.

Our premium Premier drape is Inherently Flame Retardant (IFR) and meets the requirements of the NFPA 701 fire code. A lot of other Premier drapes are only topically treated (FR) for up to 5 washes, but ours is IFR and we use a heavier weight fabric compared to most other Premier drapes out there!

100% Polyester drapes are machine washable and dryer safe (see Laundering tab for details).

This medium weight, elegant looking material has the selvedge cut off of the edges, but no further edge finishing is performed (the fabric does not fray).

Drape opacity is approximately 60% - 70% light blocking. This range is an estimate only, for normal / standard lighting situations. Many factors can affect the opacity of a fabric, including where it is being used (near a wall vs. dividing the middle of a room), light sources, and the amount of fullness in the material (the amount of bunching / gathering).

This pipe and drape kit will ship in multiple boxes. The approximate size and weight of each individual item is listed under the SPECS tab.

Black Powder Coated upgrade for Uprights and Bases is available via the optional checkbox. Choosing this option may result in a slightly longer production time before shipping.

To extend your width beyond the 10 feet included in this package -- to create a longer linear span, make right angle turns, etc. -- please see our Connecting Extender Package related item.

Please note: The photo shown is for illustrative purposes only. Pieces may differ in appearance depending on package. Pipe and drape is intended for indoor, decorative use only.

View All Reviews

Great Product... Super Satisfied

I needed pipe and drape for a clients last minute photo booth request so I immediately called to make sure that my order would arrive in time. The helpful lady who answered was kind/professional and assured me that my order would make it in time. Sure enough it did, in fact it arrived 3 days sooner than expected. The quality of the equipment is great and easy to setup. So glad that I chose this company and will definitely be ordering more in the future

Reviewed by: LaQuisha from Los Angeles. on 6/14/2016

Great Product

The product handled all my needs for my event for some very influential people. Tall enough to handle my needs. The only downfall is the product only does 2 sizes - 6 OR 10 feet, reads as it will do 6 to 10 feet (like you can do any size between the two). Would be great if it had additional lock holes to accommodate any size between. Other than that it was fantastic. Very easy setup.

Reply from PipeAndDrapeOnline.com: Hi Susan! Thank you again for your order, and we're so glad to hear that your event looked amazing! For the width, you are able to set the Drape Support Rod / Crossbar (horizontal pipe) at any dimension between 6 feet and 10 feet wide. There is a button stop at 8 foot and 10 foot increments for quick measuring, though the button does not have to be engaged to use the crossbar at a particular width within the 6 to 10 foot wide range. Please let us know if you have any questions - we're always happy to help!

Reviewed by: Susan Wood from Midland TX. on 5/23/2016

Great Service... Big Win!

We needed to get the pipe and drape fast... Decided to use in our weekend early service for room atmosphere and direct people to sit in particular format. Caitlyn was tremendously helpful in rushing our order and accurately giving us a ship receive time. It was a big win for our new weekend service!

Reviewed by: Cal from Fremont, California. on 5/18/2016

Recreation Supervisor, Special Events

Great item - very functional and delivered in no time at all. Will definitely be using this company when more pipe and drape is needed!

Reviewed by: Mario Palmentieri from Tallahassee , Florida. on 1/11/2016

Purchasing Manager

Reviewed by: Debra J Jordan from Soboba Casino. on 7/20/2015

Q: can you get an adjustable pole to make any width?

Asked by: laura - 9/10/2014

A: The Drape Support Rod (Crossbar) that is included in this Pipe & Drape Kit can be set to any width between 6 feet and 10 feet. Thanks! Answer provided by: Pipe And Drape Online (9/10/2014)

Q: Can we put 3 of these sections connected in a line to cover a 30' length ?

Asked by: Bill Rice - 3/15/2016

A: You would have the option of connecting 3 of these systems to create a 30 foot wide span (you would just have a couple of extra parts leftover), and you could also use them as free-standing sections that are each 10 feet wide if you ever wanted to do that as well.

Otherwise, if you would always be connecting them together, and would never need 3 separate / stand-alone sections, then we'd suggest 1 of these Complete systems + 2 of our Connecting / Extender kits to make 30 feet -- this would be a less expensive way to create an ''always connecting'' 30 foot span.

Let us know if you have any questions. Thanks! Answer provided by: Pipe And Drape Online (3/15/2016)

Q: Do the 8 x 10 poles breakdown?

Asked by: sherry - 4/20/2016

A: The Uprights (vertical pipes) are ''fixed height'', meaning they do not break down -- if you are traveling with this kit, you would need to ensure that you can safely fit an 8 foot pipe in the vehicle. The Drape Support Rod (horizontal pipe) can collapse down to a minimum of 6 feet.

We do offer an 8x10 Break Apart kit, where the Upright pipes would break down into 4 foot sections. That may be a better option if you plan to transport your pipe and drape, but do not have a large vehicle to accommodate the fixed uprights in this kit.

Please let us know if you have any other questions. Thanks! Answer provided by: Pipe And Drape Online (4/20/2016)

Q: Is the 8ft vertical pipe adjustable for transport or is it 8 foot fixed with no adjusting ?

Asked by: Okachi - 4/9/2017

A: Hello, the 8 foot vertical upright pipes in this kit are fixed height. They are not adjustable and do not otherwise break down to a smaller size.

We also offer both an 8 Foot Tall Break Apart Kit (the height is 8 feet, but the uprights break apart into smaller 4 foot sections for easier transportation), as well as an Adjustable Height Kit that can be set anywhere between 6 feet and 10 feet tall (telescoping uprights).

Let us know if we can help in any other way. Thanks! Answer provided by: Pipe And Drape Online (4/9/2017)

Q: What is the diameter of the pipe? Thx! John

Asked by: John - 8/22/2017

A: Hi there! All of the pipes in this package -- the Uprights and Support Rod -- have an Outside Diameter (OD) of approx. 1.5 inches. Please let us know if we can help in any other way. Thanks! Answer provided by: Pipe And Drape Online (8/22/2017)

Q: Can I hang my banner on this display? If so, how does it attach? Thanks

Asked by: Christine - 9/12/2017

A: You could absolutely hang a banner on this display. We still recommend using no more than 15 pounds of evenly distributed weight (that would include both the drape panels and your banner).

As for attaching, if your banner has grommets, we also carry Metal S Sign Hooks that would go over the Drape Support Rod that is included in this kit.

Please let us know if you have any questions. Thanks! Answer provided by: Pipe And Drape Online (9/12/2017)

Q: Can two sections be placed together to create right angle/L-shape?

Asked by: Eric - 11/7/2017

A: Absolutely, you could use 2 of these Packages to create a right angle (''L shape''). However, if you would always be connecting them together to form a right angle -- and would never need to use them as separate / stand-alone sections -- then we'd suggest 1 of these Complete kits + 1 Connecting / Extender kit. Doing it that way would save you some money, as long as you would always be connecting them.

Otherwise, if you prefer the versatility of being able to either connect them, or use them separately, then 2 of these Complete Kits could accomplish either of those scenarios. Answer provided by: Pipe And Drape Online (11/7/2017)

Step 1: Screw the base pin on to the base

Using the screw located in the bottom of the base pin, push the threaded screw through the bottom of the base (the screw head should rest against the flat part of the base, not the raised counter-sunk part).

Then, screw the base pin onto the base (the base pin goes on the raised portion).

Tip: For maximum stability, we recommend using the center hole for your base pin.

Step 2: Place the upright pipe over the base pin

Our Slip-Fit Uprights are hollow, so putting them onto the base is easy! Just slide the upright over the pin.

Tip: Make sure that the "top slots" -- located right near one of the ends of the upright -- are at the top when you put it on the base. If you put the upright upside down (where the top slots are put over the base pin), then you won't be able to use the drape support rod.

Step 3: Put the drapes on pipe and drape support rod / crossbar

Using the sewn-in pole pocket on your drape, "sleeve" the drape(s) onto the drape support rod.

Step 4: Place the support rod hook end into a slot in the upright pipe

Now that your drape is on your drape support rod, place the hook end of the drape support rod into one of the open slots on the upright.

Tip: Have both of your uprights set up and in place so that each hook end of the drape support rod has a home.

Step 5: All done! Now you have a fully assembled Pipe and Drape Backdrop

You're all done! In less than 10 minutes you now have a pipe and drape backdrop. For an extra tip, continue reading below.

Extra tip - Making sure your spacing is correct:

Once you have the base pin on your bases (Step 1), take the drape support rod, set it to the width that you would like, and carefully place it on the floor. Then put a base at each hook end -- where each hook end is lined up to where each base pin is located.

This helps you check that your spacing is correct before you've already put your drapes on the support rod.

If you want to double check, put your uprights over the base pin (Step 2) and hook the support rod into the lower slots (if available; not all uprights have lower slots). Check to see if it is properly spaced, and then proceed to Step 3.

For questions regarding any portion of setting up your pipe and drape display, please contact us and we'll be happy to help guide you through it!