Need Help? Call: 770.442.8777 M-F: 9AM-5:30PM EST
Double Layer Add-On - Create a Second Fabric Layer
Easily create a second layer for your pipe and drape backdrop!

Wave Style Ceiling Drape Calculator

Depth of Swag (in feet; usually between 3-5 feet)
*This is how far each swag will swoop down toward the floor before going back up toward the ceiling

Number of Swags
*This is how many times you want your single drape to swoop down

Total Length of the Room Being Swagged (in feet)

Length of Panel You Need (in feet)


Double Layer Add-On - Create a Second Fabric Layer

DL2
Availability:
In Stock
37.94
List Price: $44.77
Your Price$37.94
You Save:$6.83(15%)

Choose Options

Upgrade to 8-10' Break Apart Support Rod? help
Yes (+$10.93)
Quickly and easily create a second (front) layer on your pipe and drape backdrop! If you're looking for a double layer, this add-on item is the perfect solution.

  • This is an add-on to create a second (front) layer. A free-standing pipe and drape kit is required, but is not included in this item. If you do not have a kit, we offer Complete Backdrop Kits (with drapes), as well as Framework Only Kits (no drapes).

  • This item includes Qty 1: B402 - 6 foot to 10 foot wide horizontal Drape Support Rod / Crossbar pipe (or Qty 1: B406 - 8 to 10 foot wide Break Apart Drape Support Rod / Crossbar, if you select that option*) and Qty 2: VH-3 - 3 inch Valance Hanger. Please note that it will create a front layer either 2 inches or 3 inches in front of the rear Drape Support Rod that you are using with your kit, but drapes / fabric for this front layer is not included in this item.

  • *You'll want to make sure that your Support Rod selection matches the Support Rod that you are using with your Backdrop Kit. If you have a 6 to 10 foot wide Support Rod with your kit, then we do not recommend the Break Apart Upgrade option, as they will not match. Likewise, if you have selected our Break Apart Support Rod for your Backdrop Kit, then you will likely want to choose the Break Apart Upgrade option for this add-on as well, so that all of your Support Rods are the same.

  • 3 inch Valance Hangers work with both our 1.5 inch diameter and 2 inch diameter vertical Upright pipes.

  • Telescoping support rod has a 1.5 inch outside diameter.

  • Drape Support Rod is an aluminum pipe featuring a steel hook on each end that is cast in aluminum for extra durability. Valance Hangers are made of steel.

  • The front layer that you create with this item supports a maximum of 15 pounds of evenly distributed weight.

  • This is for 1 drape support rod (crossbar) and 2 valance hangers only. Pipe and Drape Kit and drape / fabric for the front layer are sold separately.

Related Items

Recently Viewed Items