Need Help? Call: 770.442.8777 M-F: 9AM-5PM EST

> Connecting Extender 8 Foot Tall x 54 Inch Wide Portable Sneeze Guard

Connecting Extender 8 Foot Tall x 54 Inch Wide Portable Sneeze Guard

Wave Style Ceiling Drape Calculator

Depth of Swag (in feet; usually between 3-5 feet)
*This is how far each swag will swoop down toward the floor before going back up toward the ceiling

Number of Swags
*This is how many times you want your single drape to swoop down

Total Length of the Room Being Swagged (in feet)

Length of Panel You Need (in feet)

Connecting Extender 8 Foot Tall x 54 Inch Wide Portable Sneeze Guard

Part Number: ID-8-CBD-CV

Availability:

In Stock

List Price: ~~$168.43~~

Your Price$140.35

You Save:$28.08(17%)

Questions about this item? Ask here.

Upgrade to DuraTop Uprights?

Yes, upgrade to DuraTop (+$18.50 per package)

REQUIRED: I understand that this item is not eligible for a cancellation, modification, return, refund, or exchange once production has started.

Yes, I agree

Quantity

Description
Reviews
Shipping Time

Specs

Laundering

Assembly

IMPORTANT: A Connecting Extender will NOT stand up by itself. It requires an existing complete Isolation Divider kit (see 'Related Items' below) or a set-up that is already in place. Connecting Extenders only extend the width of a linear span, create right angle turns, etc. Read more about how a connecting package works.

Use in conjunction with our Isolation Divider kit to create "side walls", extend the linear width of your set-up an additional 4 feet 6 inches (54 inches), create right angle turns, and more.

IMPORTANT: Because of the nature of usage for this item, all sales are final. Please read all of the information below and ensure that the height, width, and overall application will work for your needs.

This 8 foot (96 inch) tall x 4 foot 6 inch (54 inch) wide sneeze guard / isolation divider connecting extender kit includes:

Qty 1: B102 - 8 foot tall silver fixed height slip-fit upright (1.5 inch diameter)
Qty 1: B505 (B505BK) - 16 inch x 14 inch base, with upgraded 6 inch tall base pin (approx. 12 lbs. each with included base pin) - NOTE: your base plate may be silver or black, depending on availability at the time of your order
Qty 1: B54W - Fixed 54 inch wide silver drape support rod / crossbar
Qty 1: CV-8 - 96 inch high x 54 inch wide clear flexible Vinyl panel with 4 inch rod pocket located at the top

A Fixed Upright is one piece. Likewise, the Crossbar in this kit is fixed (one piece). These fixed pipes do not break down into smaller sections or otherwise adjust in height or width. As a manufacturer, we can customize most products - please contact us if you need a different height and/or width.

The single flexible Vinyl panel is not pleated and is intended to hang flat, without any gathering / bunching.

Vinyl panel is Flame Retardant (FR) and meets the requirements of the NFPA 701 fire code. This Vinyl divider panel is heavy duty and is commonly used for boat and auto coverings.

Remove the paper slip that the vinyl is shipped with, as long term contact may mar the Vinyl. While there is no specific guidance for a how often to clean, we recommend frequently cleaning between each use by hand washing using a mild soap and water solution (DO NOT use any abrasive soaps or cleaners), and then drying by wiping with a clean, dry cloth. Be sure to clean the entire panel, front and back, and make sure to not to cross-contaminate. Wash your hands thoroughly after cleaning.

Panel opacity is 0%. The vinyl panel is clear -- so clear that getting a good picture was somewhat difficult -- and it can be seen through easily.

This isolation divider partition extender kit will ship in multiple boxes. The approximate size and weight of each individual item is listed under the SPECS tab.

Available with an optional DuraTop upgrade (click to learn more about the benefits of DuraTop uprights).

Please note: The photos shown are for illustrative purposes only. Pieces may differ in appearance depending on package. This partition divider is intended for indoor use only.

DISCLAIMER: we do not claim or warrant that this product is FDA approved, or otherwise certified for any specific medical use. Statements regarding this item have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is designed to be used in conjunction with recommended or required guidelines, including but not limited to the use of face masks, social distancing whenever possible, and frequent cleaning -- it is not intended to serve as a substitute for medical grade Personal Protective Equipment (PPE). Please follow the latest advice of the CDC and your health care professional for ways to help keep yourself safe. The purchaser and/or final user is responsible for product application and suitability of use. All sales are final.

Step 1: Screw the base pin on to the base

Using the screw located in the bottom of the base pin, push the threaded screw through the bottom of the base (the screw head should rest against the flat part of the base, not the raised counter-sunk part).

Then, screw the base pin onto the base (the base pin goes on the raised portion).

Tip: For maximum stability, we recommend using the center hole for your base pin.

Step 2: Place the upright pipe over the base pin

Our Slip-Fit Uprights are hollow, so putting them onto the base is easy! Just slide the upright over the pin.

Tip: Make sure that the "top slots" -- located right near one of the ends of the upright -- are at the top when you put it on the base. If you put the upright upside down (where the top slots are put over the base pin), then you won't be able to use the drape support rod.

Step 3: Put the drapes on pipe and drape support rod / crossbar

Using the sewn-in pole pocket on your drape, "sleeve" the drape(s) onto the drape support rod.

Step 4: Place the support rod hook end into a slot in the upright pipe

Now that your drape is on your drape support rod, place the hook end of the drape support rod into one of the open slots on the upright.

Tip: Have both of your uprights set up and in place so that each hook end of the drape support rod has a home.

Step 5: All done! Now you have a fully assembled Pipe and Drape Backdrop

You're all done! In less than 10 minutes you now have a pipe and drape backdrop. For an extra tip, continue reading below.

Extra tip - Making sure your spacing is correct:

Once you have the base pin on your bases (Step 1), take the drape support rod, set it to the width that you would like, and carefully place it on the floor. Then put a base at each hook end -- where each hook end is lined up to where each base pin is located.

This helps you check that your spacing is correct before you've already put your drapes on the support rod.

If you want to double check, put your uprights over the base pin (Step 2) and hook the support rod into the lower slots (if available; not all uprights have lower slots). Check to see if it is properly spaced, and then proceed to Step 3.

For questions regarding any portion of setting up your pipe and drape display, please contact us and we'll be happy to help guide you through it!